The Sierra REB-1 handles all your Non Ferrous material including: Aluminum, Extrusions, Cans, Stainless Steel, Copper, Radiators and Wire with ease.  In addition, it will bale PET, OCC and all grades of paper.
 


STANDARD FEATURES:
• 75 HP (56kw), 480 volt, 3 phase, 60 hertz
• 4500 PSI (306 bar) hydraulic system operating pressure
• Wye Delta main motor starting
• Filtration: 5 micron return-line, 3 micron kidney loop
• Flooded suction power unit
• Oil Cooler
• Oil Heater
• Adjustable Ram guides “patent pending”
• Separation Door with Bale relief
• Tongue and Groove floor liner plates
• Hardox 450 Replaceable liners
• Allen Bradley PLC
• Panelview HMI provides for material selection and diagnostics
• Modem for on site diagnostics
• Automatic Operations on Most Materials
• Conveyor controls
• Main Ram penetration 60% of bale chamber
• Heavy Duty Frame and Ram construction
• Automatic Wire Tier supplied at Customer’s Request
• Operator’s platform
• Bale Table

GENERAL SPECIFICATIONS:
• Overall dimensions: 360”L x 175”W x 84”h
• Hopper opening: 60”W x 77”L
• Charge box opening: 41”W x 72”L
• Bale size expanded: 46”W x 31”H x 62”L
• Dry cycle capacity: 12,000 CU.FT/HR
• Dry cycle time: 15 SECONDS
• System pressure: 4500 PSI
• Shear / Baling force: 143 TONS
• Ramface pressure: 241 PSI
• Main pump flow: 153 GPM
• Main motor: 75HP - 460V - 3 PH - 60 HZ - TEFC
• Shipping weight: 55,000 lbs.

PERFORMANCE:
Bale Size:                        45 In Wide x 31 In High x 62-64 In Length
Bale Volume:                   50 Cubic Feet Expanded (Approximate)
Cycle Time:                     14 Seconds (no Load – Main Cylinder Only)
                                           *(8 Strokes/Bale) Estimated for OCC
 
All hydraulic controls are grouped in one easy to access location. Flexible hydraulic hoses connect the power unit to the baler.


The operator’s console and main control panel feature Allen Bradley Programmable Logic Controllers, Panelview HMI and Industrial Controls for easy to use including material selection.

 

 
  Material   Material PCF
 Infeed Density		 Bale Weight
LB		 Density  PCF
Baled 

 Output
Tons per Hr
   *OCC  2.5 -  4 up to 1450   up to 28    6-10
*News   6 – 8  up to 1600 up to 32  12-18
  *PET 75 – 4  up to 1200  up to 24  2-4
  *UBC  1.5 – 4  up to 1000 up to 20  5-8
  *Solid Waste  8 – 12 up to 2400 up to 48 18-22
   

*Note:  Performance rates, bale weights and bale densities are subject to moisture content,
            material pre-bale densities, feed rates and other variables in baling.

       Download a brochure on the REB-1 (PDF Format)
       Watch the REB-1 Video